Le formulaire New entry n'avait pas le champ et AddEntry ecrivait
totp_secret = '' en dur : il fallait enregistrer l'entree puis la rouvrir
pour poser un second facteur, alors que l'editeur portait deja le champ.
Meme intitule que l'editeur ("2FA secret"), masque pour une note comme
site et identifiant, et achemine par &o= — t, s, u, p, k, d etaient
pris.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Le chien de garde mesurait la duree TOTALE, alors que son message dit
"no reply from the server". Sur un coffre devenu gros - 286 Ko - la
reponse arrivait en 841 ms et les vingt secondes suivantes partaient dans
la derivation de la cle puis l'affichage : il criait donc a l'absence de
reponse alors que tout avait reussi, cache ecrit compris. Un faux echec
est pire qu'un vrai, il apprend a se mefier de ce que l'application dit.
Il est desarme des que le statut HTTP est connu, quel qu'il soit : ce qui
suit ne depend plus du reseau, et le voile est leve par le finally.
Au passage, les boutons des reglages n'avaient pas de margin-top : le
champ du code et ses deux boutons se touchaient et se lisaient comme un
seul bloc. Les piles de l'accueil ont leur gap ; ici les elements se
suivent en flux normal, donc c'est au bouton de reserver sa place.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
"+ new folder" n'existait qu'a l'edition. Creer une entree ET son dossier
demandait donc trois gestes - creer, rouvrir, changer le dossier - pour
ce que le meme controle sait faire ailleurs en un seul. L'asymetrie ne se
voyait qu'en s'en servant.
Deux cas que le chemin de l'edition ne posait pas : un champ laisse vide
et le marqueur interne du "+ new folder" retombent tous deux sur All -
sans quoi valider sans rien taper aurait envoye au coffre un nom de
dossier fait d'un caractere de controle.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Il vit en bas des reglages, apres tout le reste, et demande deux appuis :
un effacement sans retour ne se declenche pas sur un doigt qui glisse.
Absent en release, et pas seulement cache : la commande du pont n'est pas
compilee et Delphi ne devoile la section que dans une version de
debogage. Le bouton ne peut donc pas reapparaitre par accident. Verifie -
Release compte 8060 lignes contre 8072 en debug, soit exactement ce bloc.
DropLocalVault efface le cache, le conteneur local et le drapeau
d'attente, chacun sous son propre try : un fichier absent ou verrouille
ne doit pas empecher les deux autres de partir. Les reglages du depot
restent - c'est le coffre qu'on jette, pas la facon d'aller le rechercher.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Retenir le focus au mousedown fait atteindre la cible du premier coup,
mais laissait le clavier ouvert : apres "Open vault" il restait dresse
par-dessus la liste. Les deux moities vont ensemble - on retient le focus
le temps de l'appui, on le lache des que l'action est partie.
Sauf si le bouton agit sur le champ lui-meme : un oeil qui devoile, une
fleche qui deroule. Ceux-la vivent dans la meme rangee que le champ, et
replier le clavier apres eux obligerait a le rouvrir pour continuer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Le toast vit a bottom: 14px, donc sous le clavier des que celui-ci est
leve : il ne se decouvrait qu'en quittant l'ecran, quand le clavier se
repliait. Et depuis qu'un appui sur un bouton ne vole plus le focus, le
clavier RESTE ouvert - ce qui a rendu systematique un defaut jusque-la
occasionnel.
Il remonte au-dessus de la reserve que body.typing menage deja pour le
clavier : meme mesure, meme raison.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Un bouton touche pendant qu'un champ a le focus recevait d'abord le
blur : le clavier se repliait, la reserve de body.typing disparaissait,
la page remontait - et le bouton n'etait plus sous le doigt quand le clic
partait. Il fallait appuyer deux fois, la premiere ne servant qu'a fermer
le clavier.
Empecher le defaut du mousedown empeche le TRANSFERT DE FOCUS, pas le
clic : le champ garde le curseur, rien ne bouge, et l'appui atteint sa
cible du premier coup. Pose sur toute la page - le piege n'a aucune
raison d'etre propre aux reglages.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Le toast n'avait pas de z-index : il se peignait DERRIERE l'ecran des
reglages, qui est a 80. "Unlock code set" partait bien, mais sous la
page, et ne se decouvrait qu'en sortant - quand il ne s'etait pas deja
eteint. Un message qui ne se voit pas la ou on l'a provoque ne sert a
rien.
La section du code de deverrouillage ne parait plus que coffre ouvert.
Poser comme retirer exigent le clair en main : coffre ferme, les deux ne
pouvaient que refuser, et proposer une action qui refuse toujours vaut
moins que ne rien proposer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Le coffre ouvert ne prouvait rien : il peut l'etre depuis une heure et
rester a l'ecran. Quiconque trouvait le telephone dans cet etat levait la
protection en deux appuis, sans que rien ne le lui demande.
Le code courant voyage maintenant avec la demande, et Delphi le compare a
FPinSealed - ce sous quoi le cache est REELLEMENT scelle, pose seulement
par une ouverture reussie, jamais par un champ.
Fermee au passage : SetUnlockCode('') retirait le code en silence, ce qui
contournait le controle qu'on vient de poser.
Le FBusy de ClearUnlockCode ne sort plus sans un mot - une sortie muette
se lit comme une reussite.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Un refus s'affichait du meme gris qu'un etat : "Master password: 8
characters at least" se lisait comme "Vault on this device", et rien ne
disait que l'application venait de refuser. StatusErr le met en rouge -
deux procedures plutot qu'un drapeau devine du texte, parce que trier des
messages sur leur contenu a deja detruit un cache dans ce projet. C'est
l'appelant qui sait s'il refuse.
La croix des champs etait calee a top: 8px, en compensation du margin-top
du champ. Les piles annulent ce margin depuis qu'on y a unifie
l'espacement, et la croix restait donc 8 px trop bas. Elle s'ancre
desormais au bord INFERIEUR, le seul que le champ touche dans les deux
cas.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Le mot de passe de creation scellait le conteneur local ET pretendait
sceller l'instantane du depot. Un coffre cree ici publiait donc sous son
propre mot de passe, que le poste ne savait plus ouvrir - et le
rafraichissement echouait avec "wrong password" sur un depot pourtant
intact.
FVaultPwd ouvre le conteneur local et s'arrete la. Le secret du depot vit
dans les reglages, doit etre le meme sur tous les appareils, et c'est lui
seul qui ouvre et rescelle l'instantane.
Les deux ne se rencontrent qu'a UN endroit, la reconciliation : le
conteneur local s'ouvre sous le sien, puis la cle est jetee avant de
toucher au depot - la garder rescellerait le depot sous le mauvais
secret. Ailleurs ils ne se croisent jamais : un coffre ne ici ne publie
pas, un coffre publie n'a plus de conteneur local.
Migration : rien a rechiffrer. Les coffres existants ont simplement les
deux valeurs egales, et cessent d'etre forces de le rester.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
"Local vault unreadable" laissait croire a une corruption, donc a une
perte, alors que le coffre est intact dans le depot. Quand Android a
lui-meme detruit la cle - verrouillage d'ecran retire ou reinitialise -
l'application le dit maintenant, et dit aussi que rien n'est perdu.
Le tri passe par un drapeau pose la ou l'invalidation se constate, pas
par un test sur le texte du message : c'est ce tri-la, fait sur des
chaines, qui detruisait autrefois le cache en se trompant.
Le code de deverrouillage accepte un mot de passe, et l'a toujours
accepte - aucune validation n'a jamais impose des chiffres. Seul
inputmode="numeric" le laissait croire, et le clavier numerique
decourageait d'essayer. Clavier complet, libelles et note mis a jour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Un champ porte son propre margin-top de 8 px, dont il a besoin dans les
reglages ou les champs se suivent en flux normal, sans gap. Dans une
pile, ce margin s'ajoutait au gap : deux champs se retrouvaient a 16 px
l'un de l'autre, un champ et un bouton a 8. Dans une pile, c'est le gap
qui commande.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
L'espace de 8 px vit A L'INTERIEUR de chaque pile. "Create vault" et
"Download vault" etaient dans deux piles voisines et se touchaient donc,
tandis que "Download vault" et "Settings", dans la meme pile,
respiraient. Un margin entre piles adjacentes suffit.
L'ordre suit maintenant les frequences et non l'ordre du code : aller
chercher le coffre, regler, creer en dernier. La creation etait en tete
parce que son bloc etait ecrit en premier dans la page.
L'accent suit le geste attendu - il va a "Download vault" des qu'un depot
est configure, et ne reste sur la creation que lorsqu'il n'y a rien a
aller chercher.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Deux branches de l'ouverture posaient le code a partir de ce qui trainait
dans les champs.
La premiere appliquait un "nouveau code" depose par les reglages. Elle
n'exigeait rien de celui qui le deposait : n'importe qui tenant le
telephone deverrouille pouvait en poser un, et c'est le proprietaire qui,
en ouvrant son coffre, l'appliquait contre lui-meme.
La seconde rescellait sous le code tape des que le cache ne l'etait plus,
ce qui DEFAISAIT LE RETRAIT : on retirait le code, le champ le portait
encore, et l'ouverture suivante le reposait sans qu'un mot le dise. Le
premier octet du cache le disait - VER_PIN apres un retrait annonce
reussi.
Poser et changer passent maintenant par SetUnlockCode, jumeau de
ClearUnlockCode : geste explicite, coffre deja ouvert - donc code courant
connu - et effet immediat. Le champ de l'accueil ne veut plus dire qu'une
chose, "ouvre avec ceci", et ne parait que lorsqu'un code est pose.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Il y en avait deux, "Settings" et "Log", et le second a fini par ouvrir
le premier depuis que le journal a demenage dans les reglages. Un bouton
nomme "Log" qui ouvre "Settings" se ment sur son etiquette.
Settings redevient VISIBLE EN PERMANENCE. Le cacher des qu'un coffre
existe laissait l'accueil sans aucune porte vers les reglages - et c'est
precisement quand le coffre refuse de s'ouvrir, code faux ou adresse
fausse, qu'on en a besoin avec le journal. Ce n'est pas un doublon de la
roue dentee : celle-ci est DANS le coffre, ce bouton est sur l'accueil,
jamais cote a cote.
En release, c'est desormais le bouton des reglages qui s'efface, l'appui
long sur la ligne d'etat le ramenant comme avant.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Il n'affichait rien, et pas parce qu'il etait vide. togglePanel
parcourait ['cfg','log'] et cherchait pour chacun le bouton qui le
commande - or btnCfg a perdu son data-panel le jour ou les reglages sont
devenus un ecran. La premiere iteration levait sur un null, et le journal
n'etait jamais deplie, quel que soit le chemin.
Il vivait de plus sur l'accueil : "Show the log" refermait les reglages
pour le deplier derriere, c'est-a-dire sur un ecran qu'on ne regarde plus
des que le coffre est ouvert. Il est maintenant DANS les reglages, deplie
sur place - le seul ecran atteignable depuis l'accueil comme depuis le
coffre.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Le garde pose juste avant fermait la seule porte : le bouton Sync ne vit
que sur l'accueil, et une fois le coffre ouvert on est sur la liste, ou
il n'existe pas. Synchroniser devenait impossible des qu'un code etait
pose. Sync ouvre donc le coffre - ce qui verifie le code, seul LoadVault
le peut - et OpenLocalNow reprend la synchronisation ou elle s'est
arretee. Le drapeau est consomme des sa lecture, pour qu'un code faux ne
laisse pas une synchronisation en embuscade.
Le champ "new unlock code" quitte l'accueil : les reglages posent et
changent le code, il y faisait doublon sur l'ecran ou l'on veut seulement
ouvrir. Il reste dans la page, cache - c'est lui que "Set this code"
remplit avant pushConfig.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
La roue dentee de la liste mene au meme ecran : le repeter sur l'accueil
n'encombrait que l'accueil.
Mais pas de suppression pure et simple. Sans coffre local, la liste
n'existe pas - donc la roue dentee non plus - et il faut bien pouvoir
saisir l'adresse du depot pour aller le chercher. Le bouton parait donc
exactement quand "Open vault" ne parait pas, sur le meme signal.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The desktop keeps twenty previous versions per entry and never sent any. It
now sends three.
Three, not twenty, because the trade is not symmetrical. On the desktop they
sit encrypted column by column and never move. In the snapshot everything
travels in the clear inside the container, and comes down into a phone cache
sealed only by the device key - not by the master password. An old password
stays sensitive: it is often still valid somewhere else. The real use of the
list is short - "I changed it recently, what was it?" - and three cover it.
The other seventeen would be copies with no need facing them.
The phone reads them ON DEMAND from the raw snapshot, never into TVault:
loading them with the vault would put every entry's old passwords in the clear
in memory from the moment it opens, for something one looks at now and then.
Copying goes by RANK, not by value. The page displays the text but never sends
it back - that is the bridge's rule everywhere else, and an old password has
no reason to be the exception just because it happens to be on screen.
They leave with the plaintext at lock, on both sides.
Fetching https://<site>/favicon.ico directly would resolve a DNS name - and
open a connection - to EVERY domain kept in the vault. The list of sites where
someone holds an account is precisely what this vault protects; handing it to
the network for a sixteen-pixel drawing would be a poor trade. The relay sees
only that someone is interested in one domain, which is why the call is asked
for entry by entry and never happens on its own.
Two tries: the full host, then the second-level domain - chat.qwen.ai has no
icon at the relay, qwen.ai does. The type comes from the first bytes, never
from the extension: the relay answers PNG under a .ico address.
A dedicated patch rather than PatchEntryField, because icon_custom is a NUMBER
in the snapshot and writing it as a string would give "0" - which the desktop
reads with GetValue<Boolean> and would choke on. It is set to zero: the icon
comes from an automatic lookup, not from a choice, and that flag is what stops
the desktop from ever replacing a chosen icon during a refresh.
Base64 without line breaks. Delphi's encoder wraps at 76 characters by
default, a wrapped data: URI does not display, and that trap has already been
paid once on the containers.
Three things of different natures lived in collapsible panels on the home
screen - repository credentials, the unlock code, the log - on the one screen
where one mostly wants to open one's vault. They move to a settings sheet,
reachable from the list too.
A sheet, not a fourth view of the rail: each view costs its transform rules
and a place in back-key navigation, and settings is not somewhere one moves
about - it is a parenthesis one opens and closes.
The unlock code can now be REMOVED. It could not before: clearing the field
meant "nothing typed", not "drop the protection", so one could set a code and
never get out. It requires an open vault, and that is the proof being asked
for - the cache only let itself be read under the right code. Without that,
anyone holding the unlocked phone could lift the protection without knowing
it.
The refusal that guards every other path stays: it is what stopped a sync
from silently undoing a code. Removing is the one deliberate way out, and it
says so at the call site.
The old fields stay in the document as the source Delphi knows; the sheet is
only a view of them. Emptying them would lose the configuration at the first
sync.
A probe every ten minutes compares the remote fingerprint to ours and lights
an indicator. It does not pull: adopting on its own while someone is reading
an entry would change it under their eyes. The user decides when.
The body is downloaded anyway - Gitea's contents API cannot answer without it
- but it is thrown away undecrypted: no derivation, no write, just a string
comparison. The cost is network, not time or battery.
It rides the idle timer rather than a second one. That timer already beats
every 15 seconds for auto-lock; counting its beats costs an integer, where
another timer costs an object, a lifecycle, and one more chance to forget it
on shutdown.
Two indicators, two colours, two gestures. Orange: things wait HERE and the
repository does not know. Blue: the repository holds things we do not have.
One dot for both would say "something is wrong" without saying what - and one
is resolved by publishing, the other by fetching.
Two defects found by re-reading before adding more, along with a test plan.
MergeSnapshots merged entries and tombstones but not folders. A folder created
on the phone - offline, or just before another device published - vanished
from the list while the entries kept its name: filed under a folder nothing
displays, unfindable without knowing it. That is exactly what EnsureFolder was
written against, come back through another door.
The pending dot sat on the padlock, which only exists in the list. After
locking one lands on the home screen - precisely where one decides to sync -
and it said nothing there. It is on Sync as well now.
TESTS.md records what the reading checked and what it left alone, with reasons
for the two defects deliberately not fixed, and a scenario that says what each
step must PRODUCE rather than only what to do.
The save used to start from the network: without it, nothing was kept. But
what someone has just typed is already theirs - publishing is a consequence,
not a condition. The cache is written first, always, and the repository
follows when it can.
A failed publish no longer loses anything. It raises a flag, and the toast
says both things: that it is kept, and that the repository does not know yet.
A bare "failed" would have people retype what is already there.
On conflict the two snapshots are now MERGED rather than the change replayed.
Replaying one edit onto the fresh snapshot was right while writing required
being online; with offline saving several changes can be waiting here, and
replaying one would drop the others.
Sync publishes what is pending BEFORE fetching. Fetching first would overwrite
our cache with the repository's version and the offline change would vanish
without a word - exactly what offline saving promises to prevent.
A dot on the padlock says changes are waiting: discreet until looked for,
present at every glance.
The creation form still put a note's body behind a single-line input, so one
could read and edit multi-line text but never create it - the note had to be
created, then reopened to be laid out.
And the newline could not be typed at all: the handler that turns the
validate key into "fold the keyboard" applied to every field. That rule
exists because in a one-line field the key can only jump to the next one, and
the next one sat on an off-screen view - which is how the unclosable keyboard
happened. In a text area, Enter means Enter. It is the third time that
handler has misfired by treating "any field" as one thing; it now carries its
three exceptions explicitly.
Two things fixed in the same code, since they lived there:
Rows were recognised BY THEIR LABEL - prose. Renaming a caption would have
been enough for this code to stop acting on it, silently. They go by id now.
And what is already typed survives a change of kind. Replacing the control
without carrying the value over would have wiped the entry for a mere change
of mind between Login and Note.
white-space defaults to normal, which folds newlines into spaces: the body of
a note read as one run-on paragraph, while the editor showed it correctly.
The formatting looked lost until you opened the pencil - the worst kind of
mismatch, since it invites re-typing what was already there.
The same rows also drop break-all, which cuts mid-word. That suits a password
and not prose; they break only where they must.
Making every field editable put a note's body behind an <input>, and HTML's
value sanitization removes CR and LF without a word. The formatting would
have been lost on the phone and published to the repository at the next
save - silent, and irreversible once the desktop pulled it.
Multi-line is marked on the row in Delphi, like the field name, rather than
guessed from the caption or from whether the value happens to contain a
newline today: a single-line note one wants to make multi-line deserves the
same control.
The row wraps through a class set when the editor opens, not through :has() -
that selector does not exist before Chrome 105, and an older engine would
ignore the rule without saying so.
Two questions, and the code was only the second one.
WHERE THE FILE LANDS. The private directory is useless - no file manager
opens it and it leaves with the uninstall - and direct external storage has
been closed since Android 10. Of the three remaining doors, MediaStore ->
Downloads is the only one needing neither a permission nor an extra screen:
since API 29 an app may write what it inserted itself. The destination picker
would need an activity result, which FMX makes painful; sharing would need a
FileProvider in the manifest. Below API 29 it would take
WRITE_EXTERNAL_STORAGE - one of the ten permissions just removed - so it
refuses and says so.
WHERE THE CONTENT IS. TVault drops it on purpose: a single attachment took
the cache from 13 to 174 Ko. It is re-read from the raw snapshot, which has
been in memory ever since saving stopped fetching before publishing. The same
data now serves two needs that had nothing to do with each other.
Decoding and writing happen off the main thread, under the waiting veil: a
few megabytes would freeze the screen, and the veil would not even paint.
What leaves the application leaves its protection: the file lands in the
clear in Downloads. The confirmation names the place rather than saying
"saved".
Release configuration compiles too - checked, since that is what section 5
caught out.
An empty dark blue screen, which is the window's own background with nothing
drawn on it. The cause is one name used twice: the veil element carries class
`busy`, and the state was put on the body under the same name - so
`.busy { display: none }` applied to the BODY as well, and the page vanished
the moment any operation started.
The state is now called `is-busy`, which nothing else carries. Checked the
other body states - typing, selecting, searching, on-list, on-detail - none
of them names an element, so none has the same trap.
The home screen's buttons already dimmed during an operation, but from the
list nothing moved: deleting or duplicating takes a second or two - the
container's round trip - and the screen stayed identical, as if the tap had
not registered. A veil with a turning arc now covers any screen, and it also
prevents the second tap, which would not wait any better.
Its safety net is the existing 25 s deadline: even if an operation never
hands back, the veil lifts.
The plan records where deleted entries actually are: every publish is a Gitea
commit, so the snapshot from before the deletion is still in the repository's
history, readable in its web interface and recoverable by import. Not a
screen, but a real net - and one that catches what a trash would not: an
unlucky edit, a bad import.
The floating menu was wrong for a list. It closed on the next tap, so opening
an entry afterwards took two gestures and felt like a button had got stuck.
Android's contextual bar instead: a long press selects, the top bar takes the
place of search, says how many rows are held, and offers duplicate and
delete. It goes away when nothing is held. One does not search while choosing
what to delete, and two rows of controls would fight over the same thumb.
Selection is multiple, because the cost is in the bar, not in the work: the
patch closure loops, and ten deletions become ONE publish. The container goes
up whole on every write - deleting ten entries one by one would pay that trip
ten times, and give nine chances to fail halfway.
A tap during selection picks rather than opens, which is also the way out:
unpicking the last row closes the bar. The hardware back cancels the
selection before locking the vault - locking because someone wanted to cancel
a choice is the opposite of what the gesture means.
Both menus stay, with distinct jobs: the bar acts on rows chosen in the list,
the detail's three dots act on the entry in front of you. Duplicate copies
everything, attachments included, as the desktop does - a copy that silently
lost the attached document would be a surprise discovered too late.
Two things, and the second was me misreading the question: the affordance was
asked for in the LIST, not in the opened entry.
A long press on a row opens the same menu. Not a cross per row - an
irreversible action a thumb's width away on a list one scrolls - and not a
third button per row, when those were just cleared away. A long press is
invisible until used, it is Android's convention for acting on a list item,
and it is where multi-select would go if it ever comes.
And the deleted entry reopened itself. editDone hands control back after a
refusal, but it redrew the LAST detail - after a delete the view has already
returned to the list, so the entry one had just erased came back on screen.
It now hands back to what is on screen, not to what was.
Delphi deletes by rank when the list asks, by the open entry otherwise -
exactly like open and copy. The page never sends a uuid: it has one, but
letting it name a row Delphi never displayed is a door with no reason to be
open.
It was a full-width red button at the foot of every detail, permanently in
view for a gesture one makes three times a year. It now lives behind the
three dots in the header: open, then confirm - two deliberate gestures, and
nothing lingering in sight the rest of the time.
A single item in a menu is not an oversight. The action has no way back, and
an action with no way back should not sit where a stray tap reaches it. A
cross in the corner would be worse still: that corner means "close"
everywhere else.
The plan records what the server code says about the trash: receiving a
tombstone runs DELETE FROM vault_entries, a hard delete. A deletion from the
phone removes the row on both sides and bypasses the desktop's trash. The
only net is the desktop's backups, and there is no trash to show here - the
phone never receives its contents.
Focusing the Folder field made the screen jump: every .field-in was treated
as if a keyboard were coming, reserving 60% of the height and lifting the row
to the top of the panel. A <select> opens a native list over the page - it
occupies nothing and vanishes on choice.
And the lift threshold now says what the keyboard actually covers, a little
under the bottom half. At 40% it raised fields that stayed perfectly visible,
moving under the eye what was already fine.
Show, Cancel and Save shared their row with the input field, and three words
left barely enough room to read what one types - the very crowding that made
the row overflow in the first place. A cross and a tick read without
translation.
The tick gives way to a turning arc while saving. The word "Saving..." said
the wait was real; a motionless tick would say nothing, and it is exactly
during that second or two that one presses again.
The form's Save and Delete entry keep their words: they are not inline
controls sharing a row, and the second is the only action with no way back.
Three translucent pills per list row weighed more than what they pointed at.
The drawing alone carries it.
The target stays 44 px: that is what a finger expects, and it does not need to
be visible to exist. The press feedback moves from the background to the
stroke, since there is no background left to dim.
Copying a password or a username opened the entry instead - about half the
time, which is the worst kind of failure to diagnose. Since those buttons
carry an icon, the tap target is the <svg> or one of its strokes, so reading
the attribute off the target returned null and the handler fell through to
"open". A finger landing sometimes on the glyph and sometimes on the margin
made it look random. Both handlers now resolve to the button first.
The new-entry form gets a folder, like the editor: an entry filed from the
start saves having to move it.
And a folder can now be created, not only chosen. Filing an entry under a
name is not enough - it is `folders` that fills the desktop's column, and a
name missing from it leaves the entry in a folder nothing displays, looking
lost. The two now go together, in one place, for both editing and creation.
'All' is never registered: it is the default, not a folder.
The folder had no row of its own - it shared "Folder / tags" with the tags,
so neither could be touched. It is now CHOSEN from the known folders rather
than typed: a typo would file the entry under a folder nothing displays,
here or on the desktop, and it would look lost. Tags stay read-only because
they are an array in the snapshot, and writing one as a string would break
its shape for the desktop.
The 2FA secret gets its own masked row. The code has had a panel for a long
time, but it is computed and renewed every thirty seconds; the secret is what
one sets, changes and removes, and nothing allowed that from the phone.
User, Pass, Copy, Show and Edit become drawings. Four words on a list row left
little room for the entry's name and had to be re-read every time. Every icon
carries an aria-label: replacing a word with a drawing must not take the
information away from someone listening to a screen reader.
The manifest asked for fine and coarse location, camera, phone, phone state
and external storage - Delphi's defaults, none of them used. On a password
vault those are exactly the wrong signals: whoever reads the app's listing saw
a request for position and camera with no possible explanation. The list is
written by hand now.
A trap on the way: naming the substitution marker inside the comment that
explains its removal is enough to bring it back. The substitution is textual
and does not care that it lands in a comment.
The bench credentials are no longer compiled into a release - the local
include is debug-only. Verified in the binary in UTF-8 AND UTF-16: Delphi
stores strings as UTF-16, so an ASCII grep returned zero on both sides and
proved nothing.
The log leaves the home screen in release without leaving the application: a
1.5 s press on the status line brings it back. Nothing secret is in it, but a
permanent Log button is development noise, and diagnostics must stay reachable
for the day something goes wrong remotely.
And the Release configuration did not compile at all, which nobody knew: the
two self-checks had their declarations under IFDEF DEBUG and their bodies
outside. Invisible as long as one only ever builds Debug.
Signing is what remains, and the keystore password is the user's to hold.
It was introduced with two readers and no writer. Cancel called
renderDetail(null), which threw on d.rows and did nothing at all - and
editDone, which uses it to hand control back after a refusal, was dead the
same way. That is why the successive fixes for "Cancel does not respond"
changed nothing: they all ended in the same silent throw.
Assigned where a detail is drawn, which is the one place that knows it.
r-zakarya